C
ONFIGURING
THE
ADSL R
OUTER
4-38
WEP
If you want to use WEP to protect your wireless network, you need to set
the same parameters for the Barricade and all your wireless clients.
You can automatically generate encryption keys using the passphrase or
manually enter the keys. To generate the keys automatically enter a
passphrase and click GENERATE. Select the default key from the
drop-down menu and click SAVE SETTINGS.
Note: Before saving settings the key is shown in clear text. If you wireless
client does not have a passphrase utility make a note of the default
Parameter
Description
WEP Mode Select 64 bit or 128 bit key to use for encryption.
Key Entry Method Select Hex or ASCII to use for encryption key
Key Provisioning Select Static if there is only one fixed key for encryption. If
you want to select Dynamic, you would need to enable
802.1X function first.
To Next Page
Loading...
