USING THE SMCWPCI-G UTILITY PROGRAM
16
Common Tab
Network Name (SSID) — This is the Service Set ID (SSID) for
the wireless network to which you want to connect.
Network Type — Set the station operation mode to ad hoc for
network configurations that do not have an access point, or to
Infrastructure for configurations with an access point.
Transmit Rate — Set the transmit rate you want from the
pull-down menu. Click Apply Changes after you have made your
selection. Lower settings may improve throughput in
environments hostile to radio transmission.
Power Save — Enable or disable the power saving feature.
To Next Page
Loading...
