USING THE SMCWPCI-G UTILITY PROGRAM
15
Wireless On/Off - Click this button to turn on/turn off the radio
signal of the adapter.
Help - Click this button to view the help file.
Close - Click this button to exit the utility.
Configuration
When you start the Wireless PCI Adapter utility, the information
window for the SMCWPCI-G is shown as in the figure below.
Select Profile — To specify a profile for a specific configuration of
parameters.
New — Click this button to create a new profile.
Save — Click this button to save a profile after configuring the
settings.
Delete — Select the profile from the drop-down menu, and click
this button to delete the profile.
Auto Profile On/Off — Click this button to turn on/off the Auto
Profile feature.
Active Profile — The profile settings that you are using for the
current connection.
To Next Page
Loading...
