17
17. Appendix
We hope these instructions have made the installation of your Synergy Precision
Integrated Turntable and Tonearm straightforward. Care for it as befits its fine
construction. Do not invert it except where directed for service. Do not apply oil other
than that supplied by SME Limited for the purpose. Do not attempt to take it to pieces or
interfere with any of the screws except as directed in the instructions. To do so will
invalidate the warranty and may occasion costly repairs. Fit the cartridge stylus guard in
place carefully when not in use, to reduce the possible risk of damage. Keep your turntable
clean by dusting it regularly with due regard for the safety of the cartridge and stylus.
Always use the soft dust cover when not in use. Finger marks may be removed from the
black enamel/chrome finish with a linen handkerchief moistened with lighter fuel. Do not
use any other kind of spirit or solvent cleaner.
In the unlikely event of a problem concerning operation or service, always contact us in
the first instance at the address at the bottom of Section 25 (GUARANTEE), stating the
exact nature of the problem, the name and address of the dealer who supplied the unit and
its serial number which will be found on the label at the rear of the turntable base.
To Next Page
Loading...
Need help?
General
