Instructions for the user
88
9.4.4 Barbeque plate
Remove the plate only when it has cooled off. Danger of burns!
1 Lift the plate from the shaped part on the
front. Take care not to spill residues that
might be in the side drainage holes.
2 Clean it using standard washing up liquid and
a soft sponge.
9.4.5 Barbeque plate drip tray
In order to remove the tray under the barbeque
resistance:
1 Remove the plate as described previously.
2 Lift the resistance and block it sliding the hold
to the right (as shown in the figure at the
side) until it hooks on the resistance.
3 Remove the drip tray using the two handles
and clean using specific cleaning products
for stainless steel and a soft sponge.
To Next Page
Loading...
