EasyManua.ls Logo

Smeg DF345CQSX - Page 24

Smeg DF345CQSX
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
WARNING!
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
12.1 The dishwashing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results.
Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
Use more intensive washing programme.
Activate the option to improve the washing results of a selec‐
ted programme.
Clean spray arm jets and filter. Refer to "Care and Clean‐
ing".
Poor drying results. Tableware was left for too long inside the closed appliance. Acti‐
vate the function Dry Assist to set the automatic opening of the
door and to improve the drying performance.
There is no rinse aid or the dosage of rinse aid is not sufficient. Fill
the rinse aid dispenser or set the dosage of rinse aid to a higher
level.
The quality of the rinse aid can be the cause.
Always use rinse aid, even with multi-tablets.
Plastic items may need to be towel dried.
The programme does not have the drying phase. Refer to "Pro‐
grammes overview".
There are whitish streaks or bluish
layers on glasses and dishes.
The released quantity of rinse aid is too high. Adjust the rinse aid
dosage to a lower level.
The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Adjust the rinse
aid dosage to a higher level.
The quality of the rinse aid can be the cause.
The interior of the appliance is wet. This is not a defect of the appliance. Humidity condensates on the
appliance walls.
Unusual foam during washing. Use the detergent designed specifically for dishwashers.
Use a detergent from a different manufacturer.
Do not pre-rinse dishes under running water.
24 ENGLISH

Related product manuals