Smeg ECF02 User Manual

EN - 14
4 Cleaning and
maintenance
4.1 Warnings
Electrocution hazard.
• Remove the plug from the power
outlet before cleaning the coffee
machine.
• Never immerse the coffee
machine in water or other
liquids.
• Allow the coffee machine to cool
down before cleaning.
Risk of damage to the surfaces.
• Do not use steam jets to clean
the coffee machine.
• Do not use cleaning products
containing chlorine, ammonia
or bleach on parts with metal
surface nishes (e.g. anodised,
nickel or chrome-plated).
• Do not use abrasive or corrosive
detergents (e.g. powder
products, stain removers and
metal scourers).
• Do not use rough or abrasive
materials or sharp metal
scrapers.
4.2 Cleaning the coffee
machine body
To keep the external surfaces in good
condition, they must be cleaned regularly after
all use and when they have cooled down.
Clean with a soft, damp cloth.
4.3 Cleaning the coffee
machine components
Cleaning the drip tray (Fig. I)
The drip tray (6) is equipped with a red oat
(5) which projects from the cup holder tray
when the maximum liquid level is exceeded.
• Remove the cup holder tray (4) and then
remove the drip tray (6) to empty it.
• Clean the drip tray (6) with a cloth and then
re-position it together with the cup holder
tray (4).
• Dry components and reassemble in the
machine.
Cleaning the coffee lters
Clean the coffee lters (13), (14) and (15)
regularly under running water. If the holes
are clogged, clean them using the needle
supplied (19).
Cleaning the steam wand (Fig. L)
Clean the steam wand (7) immediately after
use.
• Turn the steam knob (8) anti-clockwise to let
a little steam out and allow any milk inside
to ow out.
• Check that the steam exit hole is not
blocked. In the event of any deposits,
clean the steam exit hole using the needle
supplied (19).
Cleaning the dispensing unit
The dispensing unit (2) must be rinsed
every 200 coffees made by dispensing
approximately 500 ml of water by pressing
the coffee keys (20) or (21) without adding
ground coffee or a pod.
Cleaning the water tank
Clean the water tank (11) approx. once a
month using a moist cloth and mild detergent.
Cleaning and maintenance

Smeg ECF02 Specifications

General

Product type	Espresso machine
Built-in grinder	No
Capacity in cups	2 cups
Hot water system	Yes
Number of spouts	2
Coffee input type	Ground coffee
Coffee maker type	Manual
Country of origin	Italy
Appliance placement	Countertop
Water tank capacity	1.1 L
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Cord length	1 m
Control type	Buttons, Lever
Product color	White
Housing material	Plastic
AC input voltage	220 - 240 V
AC input frequency	50/60 Hz
Auto power off after (max)	60 min
Auto power off after (min)	10 min
Package type	Box
Package depth	410 mm
Package width	230 mm
Package height	420 mm
Package weight	6700 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	329 mm
Width	149 mm
Height	330 mm
Weight	4700 g