EasyManua.ls Logo

Smeg FA35PX4 - Shipment and Repositioning; Door Repositioning; Before Calling Service; Troubleshooting: Refrigerator Not Operating

Smeg FA35PX4
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 9 -
CHAPTER 5.
BEFORE CALLING SERVICE
If your refrigerator is not working properly,it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your refrigerator does not operate ;
Check that ;
There is no power,
The general switch in your home is not disconnected ,
The thermostat setting is on «•» position,
The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly ;
Check that ;
You have not overloaded the appliance ,
The doors are closed perfectly ,
There is no dust on the condenser ,
There is enough place at the rear and side walls.
CHAPTER 4. SHIPMENT AND REPOSITIONING
Repositioning the Door
It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
It is possible to change the opening direction of the door on models without any
handles.
If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
Original package and foam may be kept for re-transportation (optionally).
You should fasten your fridge with thick package, bands or strong cords and follow
the instructions for transportation on the package for re-transportation.
Remove movable parts (shelves,
accessories, vegetable bins etc.) or fix
them into the fridge against shocks using
bands during re-positioning and
transportation.
Carry your fridge in the upright position.

Related product manuals