EN - 2 -
General warnings
WARNING: Keep vantilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: To avoid a hazard due to the instability of the appliance, it
must be fixed in accordance with the instructions.
• If your appliance uses R600a as a refrigerant – you can learn this
information from the label on the cooler- you should be careful during
shipment and installation to prevent your appliance’s cooler elements
from being damaged. Although R600a is an environmentally friendly
and natural gas. As it is explosive, in the event of a leak due to
damage to the cooler elements, move your fridge from open flame
or heat sources and ventilate the room where the appliance is located
for a few minutes.
• While carrying and positioning the fridge, do not damage the cooler
gas circuit.
• Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
• This appliance is intended to be used in household and similar
applications such as;
- staff kitchen areas in shops, offices and other working environments
- farm houses and by clients in hotels, motels and other residential
type environments
- bed and breakfast type environments;
- catering and similar non-retail applications
CHAPTER 1.
BEFORE USING YOUR FRIDGE
To Next Page
Loading...
