242221
- Press MENU (B) and Easy ironing knobs (E), and turn the
program selector to the fi rst clockwise program. Display
reads SENSOR CALIBRATION.
- Start calibration by pushing the START knob (F). The
machine performs calibration procedure automatically.
During the process the reading SENSOR CALIBRATION
is fl ashing. When the procedure is completed, the display
reads END.
- Return the program selector (A) back to “0” position.
If you change the inlet water source during the use of your
washing machine, or in case you think that water quality has
changed, you may repeat the calibration procedure at any time.
The machine will save the value of the last calibration.
18
To Next Page
Loading...
