Instructions for the user
12
5.2 Using the rotisserie rod
When cooking with the rotisserie,
position the frame on the third runner
(see 8.2.1 Oven runners). Once the
frame is inserted, the shaped part must
sit facing outwards (as shown in the
illustration).
Then prepare the rotisserie rod with the
food, using the clip forks provided.
In order to handle the rod with the food
on it readily, screw on the handle
provided.
Having prepared the rotisserie rod with
the food, position it on the guide frame
as shown in the illustration.
Insert the rod into the hole (detail B) so
that it connects with the rotisserie
motor.
Make sure that the pin is placed
correctly on the guide frame (detail A).
To Next Page
Loading...
Need help?
General
