Cleaning and maintenance
24
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide the lamp out and remove it.
5. Replace the lamp with one of the same
type (40W).
6. Replace the bulb cover. Make sure that
the inner shaped part of the glass (A) is
facing the door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
Live parts
Danger of electrocution
• Unplug the appliance from the power
supply.
Be careful not to scratch the enamel
on the side of the oven.
Do not touch the halogen lamp
directly with your fingers, but hold it
using insulating material.
To Next Page
Loading...
Need help?
General
