Smeg SMPR01 - Extraordinary Maintenance

Cleaning and care
37
ENITEN
4.6 Extraordinary maintenance
For more thorough cleaning and to avoid
proliferation of germs which could
contaminate the pasta, disassemble the
scrapers and clean the rollers of the long
pasta accessories as follows:
1. Extract the lower scrapers (1) by pressing
down on the milled parts (2) and moving
the scraper sideways.
2. Insert the end (3) of the rod in the hole
(4) of the scraper (5) and pull upwards.
3. Clean the pasta roller and the long pasta
accessories using the supplied brush (6).
4. Refit the scrapers following the above
procedure in reverse.
1
2
2
1
3
4
4
5
5
Important
• Before cleaning, leave the pasta cutting
accessories to dry for at least one hour,
then remove any dry pasta residue with
the cleaning brush. If this is difficult, tap
the accessory with your hand.
6