Smeg SMPR01 - Use; Before First Use; Fitting the Pasta Roller and Cutting Accessories

Use
29
ENITEN
3 Use
3.1 Before first use
1. Remove any protective packaging from
the outside or inside of the accessories.
2. Remove any labels from the accessories.
3. Clean the accessories (see 4 Cleaning
and care).
4. Prepare the pasta to be rolled with the
pasta roller or to be cut with the
accessories for long pasta.
3.2 Fitting the pasta roller and
accessories for cutting the pasta
1. Turn off the stand mixer by moving the
mixer lever (1) to the ‘0’ (OFF) position.
2. Remove the plug from the power socket.
3. Press the release button (2).
4. Hold down the button and raise the head
(3), accompanying its movement with
your hand.
5. Remove any standard accessories
(dough hook, wire whisk, flat beater)
which may be fitted.
Danger of electrocution
• Plug the stand mixer into a grounded 3-
pin socket.
• Do not remove earth prong.
• Do not use an adapter.
• Do not use an extension cord.
• Failure to follow these instructions could
result in death, fire, or electrical shock.
1
2
3