EasyManuals Logo

Smeg STL262D User Manual

Smeg STL262D
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Problem Possible cause and solution
Odours inside the appliance.
Refer to "Internal cleaning".
Start the Self Clean programme with a descaler or a cleaning
product designed for dishwashers.
Limescale deposits on the table‐
ware, on the tub and on the inside
of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water softener".
Use salt and set regeneration of the water softener even when
multi-functional tablets are used. Refer to "The water soften‐
er".
Start the Self Clean programme with a descaler designed for dish‐
washers.
If limescale deposits persist, clean the appliance with the suitable
detergents.
Try a different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped table‐
ware.
Make sure that only dishwasher-safe items are washed in the ap‐
pliance.
Load and unload the basket carefully. Refer to the basket loading
leaflet.
Place delicate items in the upper basket.
Activate the option to ensure special care for glassware and
delicate items.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
14. TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550
Electrical connection
1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. MPa (bar) 0.05 (0.5) / 1 (10)
Water supply
Cold water or hot water
2)
min. 5 - max. 60 °C
Capacity Place settings 13
ENGLISH 25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg STL262D and is the answer not in the manual?

Smeg STL262D Specifications

General IconGeneral
BrandSmeg
ModelSTL262D
CategoryDishwasher
LanguageEnglish

Related product manuals