CAUTION – MAINS WATER HARDNESS
Let check from a certified service technician the main water hardness.
Only if the hardness of the mains water is known can the Smeg technician set the dishwasher's
parameters for the integrated water softener.
You should run regular checks (e.g. once or twice a year) of the mains water quality to ensure that
the initial values are maintained and adjust the dishwasher's settings if necessary.
DW: HOT WATER – this connection is optional but highly recommended; if hot water is available, using it reduces
the dishwasher cycle times to a minimum
CAUTION – NO HOT WATER
If no hot water supply is available, connect the hose to the cold water intake
3.4 Drain hose connections
The dishwasher has one or more drain hoses, depending on the model.
Rubber terminal for 21mm (1/2”) hose clamp.
The drain hoses are indicated as:
d - dishwasher drain hose – d (drain tank)
cd - steam condenser drain hose – cd (condenser drain)
See the summary table and diagram below.
Fig. 5 – Diagram, the drain connections may be made on the right or left of the appliance,
while accounting for the maximum clearance from the product
To Next Page
Loading...
