29
At the end of the program “END” flashes
Unload the dishes.
When the dishwasher is closed again, the system offers the last program run.
9.3 Operating anomalies
Open door.
If the door is opened with the cycle in progress, “CLOSE”
flashes and the program stops. After closing the door, the
program start must be confirmed by pressing and
holding it down for 1 second (light L2 changes from green to
blue).
Power blackout.
In the event of a power blackout while the cycle is running,
the program stops and restarts automatically from the
beginning when the power is restored.
To Next Page
Loading...
