Smeg CSE66-I2 - User Manual

Questions and Answers

K
Kenneth TerryJul 29, 2025
Why is my Smeg Dishwasher not cleaning properly?
- A
  Alicia HendricksJul 30, 2025
  If your Smeg dishwasher isn't cleaning dishes properly, verify that you're using the correct amount of detergent and that the special container has regenerating salt. Also, ensure the dishes are loaded correctly, the selected program matches the dish types and soil levels, all filters are clean and properly positioned, the spray arm nozzles aren't blocked, and no items are preventing the spray arms from rotating.
F
feliciahancockAug 3, 2025
Why are my dishes not drying in my Smeg Dishwasher?
- M
  Melissa SimpsonAug 3, 2025
  If your Smeg dishwasher leaves dishes undried or dull, make sure the special container has rinse aid and the rinse aid dispenser setting is correct. Also, ensure that the detergent you're using is of good quality and hasn't lost its effectiveness.
R
robert13Aug 8, 2025
How to troubleshoot Smeg Dishwasher if the program fails to start?
- D
  Diane DennisAug 9, 2025
  If your Smeg dishwasher program won't start, ensure the dishwasher is properly connected to the electrical power supply, there is no power failure, the water tap is open, and the dishwasher door is completely closed.
J
jenkinsjacquelineAug 13, 2025
What to do if water remains inside Smeg Dishwasher?
- N
  Nathan MartinezAug 13, 2025
  If water remains inside your Smeg dishwasher, check that the drain hose isn't kinked, the drain siphon isn't obstructed, and the dishwasher filters aren't clogged.
B
Breanna NicholsonAug 19, 2025
How to fix streaks on dishes from Smeg CSE66-I2 Dishwasher?
- M
  Michael MccartyAug 19, 2025
  If your Smeg dishwasher is leaving streaks or stains on dishes, verify that the rinse aid dispenser setting isn't too high.
K
Kelli CostaAug 23, 2025
Why is there rust inside my Smeg Dishwasher?
- M
  Melanie HughesAug 23, 2025
  If you notice rust traces inside your Smeg dishwasher tank, it may be due to external elements like rust fragments from water pipes, pots, or cutlery. Special products are available to remove these marks. Also, ensure you're using the correct amount of detergent and that the salt container cap is securely closed with the water softening setting properly adjusted.