Need help?Do you have a question about the Smeg CW–511 MDA and is the answer not in the manual?
General| Brand | Smeg |
|---|---|
| Model | CW–511 MDA |
| Category | Dishwasher |
| Language | English |
Safety measures, WEEE disposal, and environmental protection advice for the warewasher.
Guidance on placing and levelling the warewasher, ensuring stability and compliance.
Details on water supply and drain hose connections, including filter and pressure requirements.
Instructions for safe electrical connection by qualified personnel, including wiring and safety devices.
Explanation of the automatic water softener function and its benefits for dishwashing quality.
Procedures for initial appliance setup and accessing the parameter programming menu.
Information on what the display shows and how to interpret temperature readings accurately.
Lists adjustable appliance parameters and safety device trigger time thresholds.
Identifies malfunctions E.1 and E.2 related to temperature probe issues and possible causes.
Addresses malfunctions E.3, E.4, and E.5 concerning water intake and overheating problems.
Details malfunctions E.6, E.7, and E.8 related to water expulsion and heating element failures.
Identifies malfunction E.9 indicating a microprocessor failure and the recommended action.
Explanation of the appliance's control panel, buttons, and indicator lights.
Essential checks and preparation steps before starting a wash cycle.
Guide for first daily use, program selection, and changing programs.
Instructions for total pump-out, resin regeneration, and filling the salt tank.
Procedure for cleaning the appliance's filters at the end of each working day.
Guide for inspecting and cleaning the spray arms twice a week for optimal performance.
Instructions for preparing the warewasher for long periods of inactivity.
A guide to identifying and resolving common issues without calling for service.
User guide for errors E.1, E.2, E.4, E.5 concerning temperature and overheating.
User guide for errors E.3 and E.6 related to water intake and drainage problems.
User guide for errors E.7, E.8, and E.9 concerning heating and microprocessor failures.
To Next Page
