How to fix Smeg WD3060 if the program fails to start?
If your Smeg Washer program won't start, ensure the appliance is properly connected to the electrical mains and receiving power. Also, verify that the water tap is turned on and the washer door is completely closed.
What to do if Smeg WD3060 not cleaning properly?
If the items in your Smeg Washer aren't getting cleaned properly, make sure you're using the correct amount of detergent and that there's regenerating salt in the tank. Check that the instruments have been positioned correctly and you've selected a program suitable for the type and amount of dirt. Ensure all filters are clean and correctly fitted, the spray arm water outlets aren't clogged, the spray arms can turn freely, and the salt tank cap is firmly closed.
Why is there rust in my Smeg WD3060?
If you see rust traces in your Smeg Washer chamber, it's likely due to external factors like rust from water pipes, as the chamber is made of corrosion-proof steel. You can use commercially available products to remove these stains. Also, ensure you're using the correct detergent doses, as some can be more corrosive, and make sure the salt tank cap is firmly closed.
How to prevent streaks on dishes from Smeg WD3060?
If the elements processed in your Smeg Washer are streaked or stained, ensure that the amount of neutralising agent dispensed is not excessive and that the salt tank cap is firmly closed.
What to do if water stagnates in Smeg Washer?
If water is stagnating in your Smeg Washer, check that there are no tight bends in the drain hose, that the drain trap is not clogged, and that the appliance filters are not clogged.
To Next Page
General
