Why is there no water visible in my Smeg Washer/Dryer washing drum?
If you don't see water in the washing drum of your Smeg Washer/Dryer, it's not a malfunction. New appliances use very little water to achieve the same washing and rinsing results, so the water level is below the level of the glass in the door.
Why are there traces of detergent on my Smeg WDF14C7-2 laundry?
If you find traces of detergent on your laundry after using your Smeg Washer/Dryer, it may be because many phosphate-free detergents contain substances with low water solubility. Select the Rinse programme or brush the laundry.
Why is water not pumped out after the last rinse in delicate fabrics and wool wash programmes of my Smeg WDF14C7-2 Washer/Dryer?
If water is not pumped out after the last rinse in delicate fabrics and wool wash programmes of your Smeg Washer/Dryer, it is not a malfunction. A pause is programmed into the washing programme to prevent creasing of fabrics. To pump out water, proceed as described in "Programme End" point.
Why is not all fabric conditioner used or too much water left in the compartment of my Smeg Washer/Dryer?
If not all fabric conditioner is used or there is too much water left in the compartment of your Smeg Washer/Dryer, check that the detergent drawer siphons are correctly fitted and not fouled.
General| Type | Washer/Dryer |
|---|---|
| Loading type | Front loading |
| Washing capacity | 7 kg |
| Drying capacity | 4 kg |
| Maximum spin speed | 1400 rpm |
| Energy efficiency class washing | A |
| Energy efficiency class washing & drying | B |
| Colour | White |
| Product Type | Washer Dryer |
| Brand | Smeg |
| Model | WDF14C7-2 |
| Wash Capacity | 7 kg |
| Dry Capacity | 4 kg |
| Number of Programs | 16 |
| Control Type | Electronic |
| Water Consumption (Wash) | 55 L |
| Noise Level (Wash) | 56 dB |
| Display | LCD |
To Next Page
