Power supply ICOS-PS 3160 series Installation, use and maintenance manual - EN
Ver. 1.05 33
Wait until POWER GOOD output is active (logic level “1”) before starting to drain current
from the output. Otherwise, the unit and the devices connected to it could be damaged.
The output voltage is DC and is polarized. Be careful to the polarity when making the con-
nections, otherwise you might damage the unit and the devices connected to it.
If you need to disconnect and/or interrupt the continuous voltage downstream the device,
use devices suited to operate with DC currents; otherwise, they might not be able to interrupt
current, with consequent risk to people and devices.
To Next Page