Power supply ICOS-PS 3160 series Installation, use and maintenance manual - EN
Ver. 1.05 8
3.3 Precautions against the risk of Electric Shock
3.4 Precautions against contact with hot parts
WARNING
AVERTISSEMENT
All connectors on the equipment except for the interface connector (CTR) are potentially
connected to dangerous voltages. Pay attention, to avoid danger of Electric Shock.
During all phases of installation and maintenance of the equipment, disconnect it safely from
the power supply network. Electric Shock risk.
Some components of the apparatus (for example: the aluminium heatsink) are made of con-
ductive materials. They must be connected securely to the protective conductor (PE/
Ground) using the appropriate terminals, to avoid risk of Electric Shock.
Internally, the apparatus mounts the capacitors that retain a dangerous potential for at least
10 minutes after switching off. Before any operation, make sure that it has been disconnect-
ed from the network for at least 10 minutes.
Never use the device partially or totally disassembled. Danger of Electric Shock and / or
damage to persons and property.
The heat sink of this device may become hot during its service: Hot Surface, Risk of Burn.
Le dissipateur thermique de cet appareil peut chauffer pendant son utilisation: Surface
Chaude, Risque de Brûlure.
To Next Page
Loading...