Smith & Nephew RENASYS EDGE - Connect and Secure Soft Port; Smooth dressing and remove frame; Secure Soft Port to patient; Connect Soft Port to tubing

Smooth the dressing down while removing the RENASYS
So Port stabilization frame.
Secure the RENASYS So Port to the patient according
toyour institutional protocol.
Ensure the aeration disc, located near the orange quick
click connector, is not covered or otherwise occluded
bythemethod used to secure the So Port.
Connect the RENASYS So Port to the canister tubing
bypushing the orange quick click connectors together.
An audible click indicates connection is secure.
Activate the RENASYS pump ensuring that it is
operating at the prescribed therapy level. Please refer
to your RENASYS pump manual for full operating
instructions. Thenished dressing should be fully
compressed, rmtothetouch and leak-free.
9
8
10
For detailed product information, including indications for use,
contraindications, eects, precautions, warnings, and important safety
information, please consult product’s Instructions for Use (IFU) prior
to use.
Advanced Wound Management
Smith & Nephew, Inc.
Fort Worth, TX 76109 USA
Customer Care Center
1-800-876-1261
F 727-392-6914
www.smith-nephew.com
Shaping what’s possible
inwound care
◊Trademark of Smith & Nephew
All Trademarks acknowledged
© September 2023 Smith & Nephew
AWM-AWD-39651 _US
|
GMC1717