Smith Performance Sprayers S103E User Manual (English)

Other manuals for Smith Performance Sprayers S103E

Questions and Answers:

S
Sylvia DouglasJul 28, 2025
Why does my Smith Performance Sprayers Paint Sprayer leak at the pump?
- E
  Ebony AlvarezJul 28, 2025
  If your Smith Performance Sprayers Paint Sprayer leaks at the pump or fails to build pressure, it could be due to several reasons. First, check the tank cover o-ring (#3H) for any dirt or debris and clean it off. If the o-ring is chipped, torn, swollen, or defective, you should replace it as described in the Pump Disassembly & Reassembly section. Also, inspect the check valve (#3S) at the bottom of the pump assembly; replace it if it's missing or damaged, following the instructions in the Pump Disassembly & Reassembly section. Lastly, examine the o-ring (#3L) on the piston for wear or damage and replace it as described in the Pump Disassembly & Reassembly section.
D
Daniel KelleyAug 4, 2025
What to do if material overflows through pump barrel of Smith Performance Sprayers S103E?
- K
  Katie JimenezAug 4, 2025
  If your Smith Performance Sprayers Paint Sprayer material overflows through the pump barrel, or the pump handle rises when unlocked, it might be due to dirt or debris under the check valve (#3S) on the pump. Clean the check valve (#3S) and the valve sealing surface on the pump. Alternatively, the pump check valve (#3S) could be chipped, torn, or swollen. In this case, replace the check valve (#3S) as described in the Pump Disassembly & Reassembly section.
R
Randy MitchellAug 9, 2025
How to fix a hose leak at the tank of Smith Performance Sprayers Paint Sprayer?
- K
  krystalsmithAug 9, 2025
  If the hose leaks at the tank of your Smith Performance Sprayers Paint Sprayer, try tightening the hose nut at the tank. If the hose is cracked, swollen, or faulty, replace it. If the hose leaks at the shut-off, tighten the hose at the shut-off.
S
sandrapaulAug 16, 2025
Why is my Smith Performance Sprayers Paint Sprayer difficult to pump?
- A
  Ashley AndersonAug 16, 2025
  If your Smith Performance Sprayers Paint Sprayer is difficult to pump, it could be due to a damaged piston o-ring (#3L). Replace the piston o-ring as described in the Pump Disassembly & Reassembly section. Another possible reason is that the piston o-ring (#3L) is dry. Lubricate the piston o-ring as described in the Pump Disassembly & Reassembly section.
J
Jamie RamirezAug 21, 2025
What to do if the nozzle drips on my Smith Performance Sprayers Paint Sprayer?
- T
  Tracy NobleAug 21, 2025
  If the nozzle drips when the shut-off lever is released on your Smith Performance Sprayers Paint Sprayer, it could be due to dirt or debris in the shut-off valve. Clean the shut-off as described in the Shut-off Maintenance section. Alternatively, there may be damaged o-rings or seals in the shut-off (Kit #10). Service the shut-off seals as described in Maintenance service (Kit #10).

Smith Performance Sprayers S103E Specifications

General

Model	S103E
Category	Paint Sprayer
Maximum Pressure	3000 PSI
Motor Power	1.5 HP
Voltage	120 V
Hose Length	25 ft
Spray Tip Size	0.015 in
Pump Type	Piston
Type	Electric
Nozzle Type	Airless

Related product manuals

Industrial & Contractor Series

36 pages

Smith Performance Sprayers S103E Use And Care Manual

Table of Contents

Other manuals for Smith Performance Sprayers S103E

Questions and Answers:

Smith Performance Sprayers S103E Specifications

Related product manuals