Setting Menu
Allows changing the following:
LANGUAGE Configurable
BLEEP ON/OFF
UNITS ENGLISH/METRIC
DAMPING 0-100% (How fast the data is updated on the screen)
ALARM ON/OFF (Basic Page will show to indicate alarm is off.)
Caution: Turning the alarm off will prevent the display from showing any
active faults. Use this function only when the Engine Data Display is not
used at the helm.
SPEED GPS ON/OFF
Boat speed value can be received from either a GPS (speed over ground)
or a speed transducer (speed over water). This feature is for the Marine
application only. See the appendix for required wiring connections.
Alarm History
Provides engine snapshot data that was captured with the 5 most recent engine fault codes.
These fault codes cannot be cleared by the user.
System Menu
Note: This menu was designed for use by Cummins service personnel. Incorrect use of
these features can cause problematic operation.
DEMO Turns the display demo mode on or off.
This mode is not intended for normal usage.
RESET ALL Resets the Engine Data Display module to the factory default
settings.
UPLOAD Allows the unit to be reprogrammed when selected.
ABOUT Summarizes display running mode information.
To Next Page
Loading...