Snap-On ATECH2FM100

13
Setting LCD Contrast
This function will allow user to set LCD contrast for optimal viewing.
1. From Settings menu, use UP   /DOWN   buttons to highlight LCD CONTRAST selection then
press ENTER   button.
2. CONTRAST screen is displayed.
3. Use UP   /DOWN   buttons while viewing display to change contrast to desired level.
Selectable levels: 20 to 80 in increments of 5 (factory default = 40).
4. Press ENTER   button to accept selection and exit to Settings menu.
UP/DOWN buttons
UP/DOWN buttons
ENTER
button
ENTER
button
EXIT
SHOW INFO
SLEEP TIME
EXIT
SHOW INFO
SLEEP TIME
SLEEP TIME
2 MIN
EXIT
SLEEP TIME
8 HR
EXIT
UP/DOWN buttons
UP/DOWN buttons
ENTER
button
ENTER
button
EXIT
SHOW INFO
SLEEP TIME
SHOW INFO
SLEEP TIME
LCD CONTRAST
CONTRAST: 20
CONTRAST: 80