Snap-On CDR8850H - Declaration of Conformity

106
ZCDR8850HCE Rev. D (01/16)
DECLARATION OF CONFORMITY
Manufacturer:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53141-1410, U.S.A.
Product: Cordless Drill
Model No: CDREU8850H
Serial Number: 1415XXXX-->XXXXXXXX
The undersigned hereby declares, on behalf of the above-referenced manufacturer and product(s), to which this
declaration relates, is in conformity with the provisions of:
Machinery Directive: 2006/42/EC
Electromagnetic Compatibility Directive: 2004/108/EC
Safety: EN 60745
Product: Battery Charger Series
Model No: CTCEU720
Serial Number: 1127XXXX-->XXXXXXXX
The undersigned hereby declares, on behalf of the above-referenced manufacturer and product(s), to which this
declaration relates, is in conformity with the provisions of:
Low Voltage Directive: 2006/95/EC
Electromagnetic Compatibility Directive: 2004/108/EC
Safety: IEC 60335-1:2001+A1:2004+A2:2006
Safety: IEC 60335-2-29:2002+A1:2004
Safety: EN 60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008
Safety: EN 60335-2-29:2004
EMF: EN 62233:2008
EMC: EN 55014-1:2006+A1:2009
EMC: EN 55014-2:1997+A1:2001+A2:2008
EMC: EN 61000-3-2:2006+A1:2009+A2:2009
EMC: EN 61000-3-3:2008
The Technical Construction File is maintained at:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53141-1410, U.S.A.
The authorized representative located within the community is:
Matthew Law
Snap-on Tools Ltd
Telford Way Industrial Estate
Kettering, Northants
NN16 8SN
United Kingdom
John Fuhreck
Director of Engineering - Power Tools
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53141-1410, U.S.A.
www.snapon.com 12/13