Snap-On CT9080 - Page 90

90
ZCT9080CE Rev. A (04/21)
EC DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole
responsibility of the manufacturer:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53141-1410, U.S.A.
OBJECT OF DECLARATION:
Product: Cordless Impact Wrench
Model No:
CT9080 Series CT9080P Series
CT9080L Series
Serial Number: 2118XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Machinery Directive: 2006/42/EC
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
Safety: EN 62841-2-2:2014
OBJECT OF DECLARATION:
Product: Battery Charger Series
Model No: CTC131
Serial Number: 2027XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Low Voltage Directive: 2014/35/EU
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
Safety: IEC 60335-2-29:2002 +A1:2004+A2:2009
Safety: IEC 60335-1:2010 +A1:2013
OBJECT OF DECLARATION:
Product: Battery Pack
Model No: CTB185/CTB8187
Serial Number: 2027XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
CTB185
Safety: EN 62133:2017
EMC: EN 55014-1:2006+A1:2009+A2:2011
EMC: EN 55014-2:1997+A1:2001+A2:2008
CTB8187
Safety: EN 62133:2013
EMC: EN 55014-1:2017
EMC: EN 55014-2:2015
The authorized representative located within the
European Union (EU) is:
Francesco Frezza
Snap-on Equipment
Via Prov. Carpi, 33
42015 Correggio RE
Italy
Signed for and on behalf of the above named
manufacturer:
Place and date of issue:
Kenosha WI 53141-1410, USA
04-2021
Name, function:
Charles R Frontczak
Director of Cordless Engineering - Power Tools
Signature:
www.snapon.com