Snap-On EEWH312A - Demounting Tubeless Tires (Final Steps); Bead Movement and Removal

EEWH312A Tire Changer Operation Manual
- Page 19 -
333
Fig.15
G. Rotate the turntable clockwise (pedal down) and, at the
same time, push down on the tire sidewall to move the bead
into the drop center of the rim (Fig.16).
334
Fig.16
H. Repeat the process for removing the lower bead.
This time, lift the bead opposite to the mount/demount head
to keep it in the drop center (Fig.17).
Move the swing arm aside and remove the tire.
335
Fig.17