Snap-On EEWH312A - Mounting Tubeless Tires (Preparation); Rim Cleaning, Bead Lubrication, and Bead Engagement

EEWH326A Tire Changer Operation Manual
- Page 20 -
4.2 MOUNTING TUBELESS TIRES
A. Clean entire rim surface (Fig.18).
336
Fig.18
Liberally lubricate both beads of the tire with approved tire
lubricant (Fig.19).
337
Fig.19
NOTICE!
THESE LUBRICATION OPERATIONS ARE NECESSARY
TO MOUNT THE TIRE CORRECTLY AND GET A PROPER
CENTERING ON THE RIM. BE SURE YOU ARE USING
APPROVED LUBRICANT ONLY.
DANGER!! Keep hands
and fingers clear of
mount-demount head
during operation.