EEWH326A Tire Changer Operation Manual
- Page 22 -
C. Connect the infl ation hose to the valve stem.
D. Lift the tire with both hands so that the upper bead is
sealed to the rim edge (Fig.21).
NEVER STAND OVER TIRE WHEN
ATTEMPTING TO SEAT BEADS OR DURING INFLATION
340
Fig.22
E. Press the infl ation pedal down swiftly to the end of its travel
to activate the bead seater jets. (#6 Fig.10)
The top bead is already sealed by the lifting motion. There-
fore, the air from the bead seater jets will enter the tire
impacting on the top sidewall and rebound into the bottom
sidewall driving it into place and creating a seal.
WHEN OPERATING THE BEAD SEATER, ALWAYS WEAR
SAFETY GLASSES TO AVOID INJURY TO EYES.
F. Install valve core, if removed. Complete infl ation to manu-
facturers suggested pressure. Never exceed pressure listed
on tire sidewall.
5.0 DEMOUNTING TUBE-TYPE TIRES
To Next Page
Loading...
