Snap-On FJ200 - FEATURES; CHASSIS; HYDRAULIC POWER UNIT; MANEUVERABILITY

FJ200 5 Rev. 09/09/14
FEATURES
The Snap-on
®
FJ200 2 Ton Capacity Service
Jackwasdesignedspecicallyfortheprofession-
al technician. The Model FJ200 is assembled in
the USA and includes Patents and Patent Pend-
ing features that provide exceptional performance
and reliability.
CHASSIS
The exclusive Snap-on jack chassis is made of
steel plate with re-enforcing upper and lower
anges for added strength. Low lift height and
extendedlowproleframeprovideaccessunder
low ground clearance vehicles. High lift height for
positioning vehicles on frame straightening racks
or alignment systems. Large patented saddle
for load positioning, locks into saddle base and
is easily removed for installation of other saddle
adapters.
HYDRAULIC POWER UNIT
Thetwopumppistonpowerunitraisesthejack’s
saddle to the load quickly to save work time. Spring
loaded pump pistons are in constant contact with
the handle yoke to prevent handle from falling. An
integratedltrationsystemprohibitscontaminants
from entering hydraulic valves and high pressure
components. Self-contained non-vented reservoir
preventsuidleaks.Highperformancesealsand
hydraulic uid provide longer life. Load-limiting
and bypass valves prevent use beyond working
capacity and prevent over-extension of the ram.
MANEUVERABILITY
Wide track front wheels with crowned rolling
surface and grease ttings provide smooth
rotation. Wheels secured to axles by way of
locknuts. Two rear swivel caster assemblies are
constructed with dual bearings and lubricated
axles for minimal axial and radial play.
SMOOTH OPERATION
Fully factorylubed with grease ttings in the lift
armandtwottingsinthehandleyoketoaccess
pivot pins. Handle yoke includes quick-lock spring
knob for easy handle insertion or removal. Heavy
duty release valve assembly with built-in stop pre-
vents accidental removal and provides easy rota-
tion. Long one-piece handle for easier pumping
andpositioningofjackundervehicle.
ADDITIONAL INFORMATION:
 • Low height of 3.5" to t easily under a
variety of vehicles.
 • Liftarmiscontouredtoallowclearance 
  withvehicle’srockerpanel.
 • Maximumliftingheightof23.34".
 • Dual pump pistons for speed to reach
service height quickly.
 • Premium U-cup seals on pumps and ram
pistons for long life.
 • Removablesaddlewithrubberpad.
 • Professional,one-piecehandledesign.
 • Greasettingsinliftarmpivot,handleyoke
pivot and front wheels.
 • Front wheels have a nut and shoulder
design for positive retention.
 •
Special Snap-on high-performance hydraulic
oil for extreme temperatures and reduced
wear.
 • Internal ltration with magnet in pump
reservoir to maintain oil cleanliness.
 • Powdercoatednishfordurability. 