Snapper 14 Series Operator's Manual

Section I- FAMILIARIZATION
TRANSMISSION
SHIFT LEVER
REAR—
BUMPER
CHUTE-
DEFLECTOR
CONTROL PANEL
IGNITION-
SWITCH
ENGINE SPEED-
CONTROL
PARK /
BRAKE
lever - -y
-MOWER BELT
COVER
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operators of
the SNAPPER Series 14 REAR ENGINE RIDER. Its
purpose, aside from recommending standard operat¬
ing procedures and routine service requirements, is to
promote safety through the use of accepted operating
practices. Read, Understand and Follow the IM¬
PORTANT SAFETY INSTRUCTIONS on page 2 of
this manual and all safety messages on the Rear
Engine Rider and its attachments before operating.
1.2 NOMENCLATURE
The nomenclature drawing above. Figure 1.1, shows
the essential parts of the SNAPPER Series 14 Rear
Engine Rider. It is recommended that all operators of
this equipment become thoroughly familiar with the
controls, components and operation of this machine
before operating. Specific details Involving the engine
are found in the separate engine owner's manual.
Study these manuals before operating and keep both
handy for future reference.
3

Snapper 14 Series Specifications

General

Brand	Snapper
Model	14 Series
Category	Lawn Mower
Language	English