12
CLAMSHELL ASSEMBLY COMPONENTS
ITEM PART NO. DESCRIPTION
1 1-4517 TUBE, Grass
2 2-8700 DECAL, Read Manual (Not Shown)
3 1-1870 GRIP
4 1-6314 WASHER, 11/32 Flat (9)
5 3-6422 WASHER, 3/16 Flat (30)
6 5-8615 WELDMENT, Front Cover Brace
7 7-2873 COVER, Front
8 7-2874 DEFLECTOR (Not Shown)
9 7-2950 GASKET, Chute
10 9-0307 SCREW, #10-24 x 1/2” Self-Tapping (3)
11 9-0999 SCREW, 1/4-20 x 5/8” Pan Head Self-Tapping (9)
12 9-1079 NUT, #10-24 Hex Flange Lock (22)
13 7-2951 END CAP, Tube
14 5-8600 WELDMENT, Rear Cover Brace
15 7-2872 COVER, Rear
16 7-2876 GRILL, Rear Cover (Not Shown)
17 7-3145 BOLT, #10-24 x 1-1/2” Oval Head (13)
18 7-3179 HINGE, Rear Cover
19 9-1265 SCREW, #10-24 x 1-1/2 Machine (5)
20 7-2964 DECAL, Warning (Not Shown)
21 3-1951 LATCH, Chute/Tube
22 3-1952 BASE, Handle
23 3-7745 HANDLE, Tube
24 9-1303 BOLT, 5/16-18 x 1” Carriage
25 9-1314 WASHER, 1/4 Internal Tooth Lock (3)
26 9-1530 BOLT, 1/4-20 x 3/4” Carriage (3)
27 9-1537 NUT, 5/16-18 Wing
28 9-1576 NUT, 1/4-20 Hex (3)
29 9-1593 PIN, 3/8 Self Lock Cotter (2)
30 9-1514 WASHER, 3/8 Lock (8)
31 9-1601 NUT, 5/16-18 Flange Lock (2)
32 9-1811 BOLT, 5/16-18 x 5/8” Hex Flange Lock (2)
33 3-1954 SUPPORT, Bumper
34 2-1746 WASHER, 3/8 Flat (4)
35 9-0499 NUT, 3/8-16 Hex Top Lock (2)
36 9-0509 WASHER, 1/2 Internal Tooth Lock
37 9-0590 BOLT, 3/8-16 x 3” Hex Cap Gr. 5 (2)
38 9-0646 BOLT, 1/2-13 x 1” Hex Cap Gr. 5
39 9-1316 NUT, 1/2-13 Hex Gr. B
40 9-1299 NUT, 3/8-16 Hex Lock (2)
41 9-1304 SCREW, 3/8-16 x 1” Hex Cap (2)
42 5-8745 BRACE, Bumper
43 9-0624 BOLT, #10-24 x 3/4” Flange Lock
44 5-8641 ASSEMBLY, Chute
45 2-9784 DECAL, International Warning (Not Shown)
46 4-6720 DECAL, Chute/Deflector (Not Shown)
47 7-3172 LINK, Handle (Right Hand)
48 7-3173 LINK, Handle (Left Hand)
49 7-3171 PLATE, Hitch
50 7-3271 WEIGHT (46 lb.)
51 5-8902 SHIELD, Heat
-- 6-0480 KIT, Air Lift (Includes Items 50 thru 53)
52 3-7723 Air Lift (2)
53 9-0223 NUT, 5/16-24 Hex (6)
54 9-0228 SCREW, 5/16-24 x 5/8” Oval Head Machine (6)
55 9-0391 WASHER, 5/16 Internal Tooth Lock (6)
To Next Page
Loading...
