Snapper 6016RT - Handle Bar Group

Handle Bar Group
Footnotes:
TP 400-5131-2-RT-N
Manual No. 7006257INTERMEDIATE REAR TINE TILLER
5
Part No Descri
p
tionItem Qt
y
Note
1 1716699 2 HANDLE GRIP, Drive Control Lever
2 1722325 1 LEVER, Drive Control
3 1719038 2 HANDLE GRIP
4 1960392 4 SCREW, Pan Head Phillips #10-24 x 1/2
5 1716723 1 BRACKET, Drive Control Lever LH
6 1933896 6 NUT, Hex Nylock, 10-24
7 1716720 1 SPRING, Forward Cable Adjustment
8 2820438 4 NUT, Hex Jam, 5/16-24
9 1723692 1 HANDLE BAR ASSEMBLY
10 1719037 2 CABLE ASSEMBLY
11 1719063 2 C-CLAMP
12 1921332 3 CAPSCREW, Hex Head, 5/16-18 x 3/4
13 1723703 1 PIN, Detent
14 1723695 1 PIVOT ROD ASSEMBLY
15 1723696 1 PIVOT MOUNT ASSEMBLY
16 1921210 4 CAPSCREW, Hex Head, 3/8-16 x 1
17 1916950 5 NUT, Hex, 3/8-16
18 1924940 2 WASHER
19 1723694 1 PIVOT, Handle Bar Mount
20 1920415 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
21 1716770 1 WASHER
22 1922648 1 CAPSCREW, Hex Head 3/8-16 x 4
23 1723697 1 PIVOT, Hnadle Bar Height Adjustment
24 1960044 2 WASHER
25 1716729 1 LINK, Reverse
26 1921977 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
27 1716725 1 HANDLE, Reverse
28 1716704 1 BUSHING, Pivot, 5/16
29 1716722 1 BRACKET, Drive Control Lever RH
30 1935048 2 NUT, Hex Flange Tow Way Lock, 5/16-18
31 1921332 4 BOLT, Hex Flange Head, 5/16-18 x 3/4