Engine, Belts & Wheels Group - 6 HP
Footnotes:
TP 400-5131-2-RT-N
Manual No. 7006257INTERMEDIATE REAR TINE TILLER
7
Part No Descri
tionItem Qt
Note
1 1722157 1 BRACKET, Engine
2 1723711 1 SPACER, Engine
3 1722158 1 PULLEY, Engine 2 Groove
4 1716770 1 WASHER
5 1917356 2 LOCKWASHER, Spring, 5/16
6 1921515 2 CAPSCREW, Hex Head, 5/16-24 x 3/4
7 2805850 2 KEY, PARALLEL PLN, 3/16 x 3/16 x 1-3/32
8 1960345 1 CAPSCREW, Hex Head, 3/8-24 x 2
9 1716728 2 YOKE, Cable
10 1722159 1 ARM, Pivot
11 1716702 2 PIN, Link Forward/Reverse
12 1722162 1 GUIDE, Belt Reverse
13 1924940 4 WASHER, 3/8
14 1716805 1 PULLEY, Idler Reverse
15 1916950 2 NUT, Hex Center Lock, 3/8-16
16 1716703 2 PIN, Cotter
17 1723710 1 BOLT, Flat Head, 5/16-24 x 1-1/2
18 1722160 1 PIVOT
19 1960044 3 WASHER, 5/16
20 1716766 1 V-BELT, Forward
21 1716802 2 SPRING, Idler Arm
22 1935048 3 NUT, Hex Flange Lock, 5/16-18
23 1921332 3 BOLT, Hex Flange Head, 5/16-18 x 3/4
24 1722161 1 GUIDE, Belt Forward
25 1722165 1 COVER, Belt
26 1722163 1 PULLEY, Transmission 2 Groove
27 1721525 1 WHEEL & TIRE ASSEMBLY TILLER, Left
28 1721524 1 WHEEL & TIRE ASSEMBLY TILLER, Right
29 1716776 2 PIN, Lock
30 1716803 1 PULLEY, Forward Idler
31 1722166 1 ARM, Idler Forward
32 1722168 1 SCREW, Hex Socket Shoulder, 5/16-18 x 3/8
33 1925690 1 CAPSCREW, Hex Head, 5/16-18 x 3-1/2
34 1722144 1 V-BELT, Reverse
35 1922127 4 CAPSCREW, Hex Head, 5/16-18 x 1-3/4
36 1 ^ ENGINE, 6HP B&S INTEK, Model #126412-0023-E2
37 1721528 1 ^^ BUMPER, Guard (Optional)
^See your local Briggs & Stratton dealer for Parts & Service.
^^Bumper is not standard with the 6HP tiller, but it is an available option, order the bumper guard (Ref# 37), 4 nuts (Ref#
22) and 4 capscrews (Ref# 35).
To Next Page
Loading...
