Engine & Frame Group
Footnotes:
TP 400-5297-IR-IS-N
Manual No. 7006187TWO STAGE INTERMEDIATE FRAME
2008 MODELS
13
Part No Descri
tionItem Qt
Note
1 1664847 6 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
2 1732486 1 COVER, Belt w/Toolbox
3 1733014 1 STOP, Belt
4 1733324 1 V-BELT, 3L 33.13
5 1733583D 1 PLATE, Engine Mount
6 1734311 1 WELD, Auger Idler
7 1734313 1 V-BELT, 4L 37.00 Auger
8 1917356 3 LOCKWASHER, Spring 5/16
9 725367 1 PIN, Hair
10 1919381 3 WASHER, 5/16
11 1921515 1 CAPSCREW, Hex Head 5/16-24 x 3/4 G5
12 1924856 4 SCREW, Hex Washer Head Taptite 5/16-18 x 1/2
13 1927429 12 SCREW, Hex Washer Head Taptite 1/4-20 x 5/8
14 2831277 1 NUT, Hex Flange 5/16-18 Whiz Lock
15 1960027 2 WASHER, 1/2
16 1960251 2 NUT, Hex Centerlock Jaam 3/8-16
17 1921982 1 CAPSCREW, Hex Head 5/16-24 x 1-1/4 G5
18 1960686 3 NUT, Hex Flange 5/16-18 Esna
19 720064 4 CARRIAGE BOLT, 5/16-18 x 1-1/2
20 720376 4 NUT, Push for 1/4 Diameter Thread
21 1740572D 1 FRAME BOX
22 1740906A 1 PANEL, Bottom
23 722072 1 BUSHING, Idler Bracket
24 722085 1 PULLEY, Engine Snow 2Stage
25 722090 1 SPOT WELD, Idler Bracket
26 722365 1 SPACER,-0.53 ID 1.00 OD 1.61 LG AUG IDLER
27 722378 2 IDLER, Plastic Ball Bearing
28 722455 1 SPRING, Extension Auger Idler
29 722887 2 SCREW, 1/4-AB x 3/4 Hex w/Extension Tooth Washer
30 724418 1 SPRING, Extension Idler
31 1921969 1 CAPSCREW, Hex Head 3/8-16 x 1-1/2 G5
32 1733451 1 ARM, Control
33 1735135 1 PIN, Clevis
34 725996 1 BOLT, Hex 5/16-24 x 1
35 1734732 1 HEAT SHIELD, 16GA (Used only on Domestic Models)
36 -- 1 *ENGINE, 9.0TP B&S Mod. #12D1140118-E1
36 -- 1 *ENGINE, 9.0TP B&S Mod. #12D1140119-E1 (CE/Export)
Note: * See your local Briggs & Stratton distributor for parts & service.
To Next Page
Loading...
