Snapper FB13250BS User Manual

ENGINE DECK GROUP
Footnotes:
TP 400-5009-1-CW-N
Manual No. 7006933FIELD & BRUSH MOWER
SERIES 0
9
Part No Descri
p
tionItem Qt
y
Note
1 7091318 10 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
2 1723549 1 PLATE, Clutch Cover
3 7091511 4 NUT, 5/16-18 Hex, GR 5 or B
4 7090187 18 WASHER, 5/16” Split Lock
5 1704723 2 CAP, Black
6 1723803 1 DECK, Engine (weldment)
7 7091302 24 NUT, 3/8-16 Hex, GR 5 or B
8 7091320 22 WASHER, .38 x .68 x .09 Split Lock
9 1723806 1 BOSS, Idler Arm Pivot
10 1723805 2 SLEEVE BUSHING, 3/4 ID
11 1723804 1 IDLER ARM, Transmission (weldment)
12 1723592 1 COVER, Engine Back
13 7091540 4 SCREW, 5/16-18 x 1-1/2” Hex Head Cap, GR 5 engine mount bolts
14 7090001 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
15 1723807 1 SPRING, Idler
16 1723808 1 ROD, Idler Tension (3/8-16 thread)
17 7090122 9 WASHER, 3/8 SAE Flat
18 7092055 1 SCREW, 3/8-16 x 3-1/4” Hex Head Cap, GR 5
19 1723583 1 PULLEY, Idler
20 7091497 1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR 5 was 91553 (1-3/4” long)
21 1723591 1 PLATE, Lower Handle Mount
22 7091619 12 NUT, 3/8-16 Hex Flange Lock or 90613
23 7076941 2 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR 5
24 7091304 7 SCREW, 3/8-16 x 1 Hex Head Cap, GR 5
25 1723585 1 SPACER, Engine Shaft
26 1723586 1 PULLEY, Blade Clutch Drive
27 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR 5
28 1723588 1 PULLEY, Trans. Drive
29 7091807 1 WASHER, 7/16” Flat (heavy duty)
30 7091301 1 WASHER, 7/16” Split Lock
31 1723589 1 CAPSCREW, 7/16-20 x 1-12” Socket Head
32 1723620 1 TRANSAXLE
33 1723590 1 KEY, 1/4” Square x 2-1/8” (engine shaft)
34 7072386 2 KEY, 3/16” Square x 2-3/16”
35 7029738 2 RETAINING RING, 3/4” External
36 7031965 4 WASHER, 3/4” I. D. Thrust
37 1723580 1 DRIVE WHEEL, Left not shown
**Purchase engine & engine parts other than those listed from engine service outlets.

Snapper FB13250BS Specifications

General

Brand	Snapper
Model	FB13250BS
Category	Lawn Mower
Language	English