EasyManua.ls Logo

Snapper GT600 - Regular Maintenance; Maintenance Schedule Overview

Snapper GT600
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Regular
Maintenance
MAINTENANCE SCHEDULE
The following schedule should be followed for normal care of your tractor and mower.
* Refer to engine owner’s manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** Service after the first 50 hours of operation, then every 250 hours of operation.
SAFETY ITEMS
Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 250
Hours
Spring &
Fall
Check Safety Interlock System •
Check Tractor Brakes •
Check Mower Blade Stopping Time • •
TRACTOR MAINTENANCE ITEMS
Check Tractor/Mower for Loose Hardware
•
Clean Debris Out of Engine Compartment
• •
Clean Radiator **
• •
Clean Transmission Oil Cooler
•
Check Transmission Oil Level
•
Change Transmission Oil & Filter ***
•
Check Front Transaxle Oil Level (4WD Only)
•
Check Mower Gear Box Oil Level
•
Check Tire Pressure
•
Clean Battery & Cables
•
Lubricate Tractor & Mower **
•
Clean Deck & Check/Replace Mower Blades**
•
ENGINE MAINTENANCE ITEMS
Check Engine Oil Level
•
Check Engine Coolant Level (Liquid Cooled)*
•
Change Engine Coolant (Liquid Cooled)*
Check / Change Engine Air Filter *
Change Engine Oil & Filter *
Drain Fuel Separator (Diesel Models)*
•

Table of Contents