27
Regular Maintenance
Drain Fuel Separator
Service Interval: Seasonally or as Needed
The fuel filter assembly has a built in water separator
that should be drained when the indicator light in the
dashboard display turns on or once per season.
Replace the fuel filter element every 800 hours of opera-
tion or as required.
To drain the fuel filter:
1. Turn the engine off, set the parking brake, remove
the ignition key, and wait for all moving parts to stop.
2. Allow the engine and surrounding areas to cool to
room temperature.
3. Place a container under the fuel filter tube and turn
the base of the filter assembly (E, Figure 24) approxi-
mately 1 turn.
4. Allow the filter to drain until all water and debris have
drained out.
5. Turn the base of the filter back to close the fuel filter
valve when finished draining.
To Next Page
Loading...
Need help?
General
