23
6-1248/6-1888 ACCESSORY, 38” TWIN BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
- 6-1888 KIT, Twin Bag Grass Catcher (Was #6-1248) (Includes Items 1 Thru 59)
1 5-9626 COVER Assembly
2 3-5706 INLET
3 1-9725 SECTOR (Inside top baffle)
4 5-9951 MOUNTING Assembly (Includes following indented item)
- 3-6263 HOLDER, Inlet
5 5-1407 SPRING & Hook Assembly
6 3-6073 BRACE
7 5-4514 ASSEMBLY, Blade (Includes #4-4686 Decal)
8 3-8087 HINGE, Top (2)
9 4-4726* BAFFLE
10 4-4685 SEAL
11 2-3797 PAD, Bumper (2)
12 5-4342 ASSEMBLY, Tube/Strap (Includes Indented Items & Item 31)
13 3-5707 TUBE, Grass
14 3-6404 NUT, #10-24 Weld
15 3-6415 SCREW, #10-24 x 5/8” Pan Head
16 3-6422 WASHER, 3/16 Flat
17 3-6433 ASSEMBLY, Strap Mounting
18 9-1552 WASHER, 7/32 Flat
19 5-4388 ASSEMBLY, Adapter/Strap (Includes Indented Items)
20 5-9469 ADAPTER
21 3-6404 NUT, #10-24 Weld (2)
22 3-6415 SCREW, #10-24 x 5/8” Pan Head (2)
23 3-6422 WASHER, 3/16 Flat (2)
24 3-6433 ASSEMBLY, Strap Mounting (2)
25 3-6543 NUT, 5/16-18 “T”
26 9-1296 WASHER, 11/32 Flat
27 9-1552 WASHER, 7/32 Flat (2)
28 9-1833 SCREW, 5/16-18 x 5/8” Pan Head
29 5-1930 ASSEMBLY, Bag (Includes Indented Items)
-- 1-9250 BAG, Grass Catcher (2)
-- 1-9965 ROD, Bag Support
-- 1-4456 CONNECTOR
30 5-7652 ASSEMBLY, Screen (Includes Indented Items)
-- 1-9731 SCREEN
-- 1-9732 FRAME, Screen
31 1-1910 DECAL, Caution
32 1-9295 DECAL, SNAPPER
-- 6-1889 HARDWARE BAG (Includes Indented Items & #6-0480 Air Lift Kit)
33 2-9841 PIN, 5/16 x 11/16” Clevis (3)
34 3-6543* NUT, 5/16-18 “T”
35 9-0492* NUT, 5/16-18 Wing (2)
36 9-1294 WASHER, 1/4 Flat (Grade 5) (4)
37 9-1296* WASHER, .11/32 Flat (Grade 5) (4)
38 9-1303* BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5 (2)
39 9-1314 WASHER, 1/4 Internal Tooth Lock (4)
40 9-1503 PIN, 3/32 x 1-1/2” Hair (3)
41 9-1530 BOLT, 1/4-20 x 3/4” Short Neck Carriage, Grade 5 (4)
42 9-1545 NUT, 1/4-20 Flange Lock (5)
43 9-1576 NUT, 1/4-20 Hex, Grade 5 or B (4)
44 9-1575* NUT, 5/16-18 Hex Center Lock, Grade 5 or B (2)
45 9-1604 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (5)
46 9-1833* SCREW, 5/16-18 x 5/8” Pan Head Machine
47 9-1318* BOLT, 5/16-18 x 3/4” Hex Cap, Grade 5 (2)
48 9-1296* WASHER, 11/32” Flat (Grade 5) (2)
49 9-0238 SCREW, 5/16-24 x 1” Hex Head Cap, Grade 5 (2)
50 9-1315 WASHER, 5/16 “Split Lock (2)
51 9-1575 NUT, 5/16-18 Hex Center Lock (2)
52 9-1605 NUT, 1/4-28 Hex, Grade 5 or B (4)
53 9-1606 NUT, 5/16-24 Hex Center Lock (2)
54 9-1611 SCREW, 1/4-28 x 3/4” Hex Head Cap (4)
55 9-1612 BOLT, 5/16-18 x 1-1/2” Carriage, Grade 5 (2)
-- 6-0480 KIT, Air Lift (2) (Includes Indented Items)
56 3-7723* LIFTS, Air (2)
57 9-0228* SCREW, 5/16-24 x 21/32” Machine (6)
58 9-0391* WASHER, 5/16” Internal Tooth Lock (6)
59 9-0223* NUT, 5/16-24 Hex (6)
*NOTE: For location, see Instruction #4-2685, included in 6-1888 Kit.
NOTE: 6-1334 Catcher Adapter Kit must be installed before Grass Catcher can be mounted.
LT SERIES (Small Frame) MANUAL No. 06613
To Next Page
Loading...
