25
6-0945 ACCESSORY, 41” TWIN BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
-- 6-0945 KIT, 41” Twin Bag Grass Catcher (includes items 1 thru 32)
1 5-9710 ASSEMBLY, Cover (Includes 3-6075, Reinforcement Bar)
2 1-9725 SECTOR (Inside Top Baffle)
3 5-9937 STRUCTURE, Frame (includes indented items)
- 2-3797 PAD, Bumper Mount (2)
- 9-0192 BOLT, 5/16-18 x 1-1/2” Square Neck Carriage (2)
- 9-0188 WASHER, 5/16” Flat (2)
- 9-0184 NUT, 5/16-18 Hex Center Lock (2)
4 5-7652 ASSEMBLY, Screen (includes indented items)
- 1-9732 FRAME
- 1-9731 SCREEN
5 5-1407 ASSEMBLY, Spring & Hook
6 3-6073 BRACE
7 1-7318 TUBE, 46” Grass
8 5-1663 ASSEMBLY, Chute
9 5-1930 ASSEMBLY, Bag (2) (includes indented items)
- 1-9250 BAG, Grass Catcher (2)
- 1-9965 ROD, Bag Support (2)
- 1-4456 CONNECTOR, Rod (2)
10 3-6076 SHIELD, Muffler Heat
- 7-1677 GUARD, Muffler Heat
11 3-8087 HINGE, Top (2)
12 9-0541 SCREW, 1/4-28 x 3/4” Hex Head Cap, Grade 5 (4)
13 9-0222 NUT, 5/16-24 Hex Center Lock (2)
14 9-0187 WASHER, 5/16” Split Lock (2)
15 9-0188 WASHER, 5/16” SAE Flat (4)
16 9-0095 NUT, 1/4-28 Hex (4)
17 9-0053 WASHER, 1/4” Internal Tooth Lock (4)
18 9-0238 SCREW, 5/16-24 x 1” Hex Head Cap, Grade 5 (2)
19 1-8593 DECAL, Snapper (11-1/2” Long)
20 1-1910 DECAL, Caution
21 3-1954 SUPPORT, Bumper
- 9-0853 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (4)
22 3-8277 BAFFLE
22A 6-0773 HARDWARE BAG (includes indented items)
23 3-7745 HANDLE, Tube
24 3-1952 BASE, Tube Handle
25 3-1951 LATCH, Chute Tube
26 9-0803 BOLT, 1/4-20 x 3/4” Flat Head Carriage (3)
27 9-1503 COTTER, 3/32 x 1-1/2” Hairpin (3)
28 9-1584 NUT, 1/4-20 Hex Flange Lock (7)
29 2-9841 PIN, 5/16 x 1-11/13” Clevis (3)
30 9-1604 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5
- 9-1303 BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5
- 9-1537 LOCKNUT, 5/16-18 Wing
- 9-1613 SCREW, 5/16-18 x 3/4” Round Head (3)
- 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (3)
- 9-1589 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, Grade 5
- 9-1575 NUT, 5/16-18 Hex Center Lock, Grade 5 or B (4)
31 1-9795 BLADE, 21” Air Lift
32 6-0735 KIT, Air Lift (includes indented items)
33 3-1724 EXTENSION, Air Lift (2)
34 9-0223 NUT, 5/16-24 Hex (4)
35 9-0228 SCREW, 5/16-24 Oval Head Machine (4)
36 9-0391 WASHER, 5/16” Internal Tooth Lock (4)
NOTE: 6-0587, Catcher Adapter kit must be installed before Grass catcher can be mounted.
LT SERIES (Small Frame) MANUAL No. 06613
To Next Page
Loading...
