Snapper Lawn Mower Accessory - Page 51

51
6-1352 ACCESSORY, 42” SNOW BLADE
(for 1-Piece Frame Hydro Drive Tractors)
ITEM PART NO. DESCRIPTION
-- 6-1352 KIT, Snow Blade (Includes items 1 thru 33)
1 3-8403 ROD, Lift
2 4-1617 WELDMENT, Bracket, 36/42 Snow Blade
3 3-4230 EXTENSION, Lift, 36/42 Snow Blade
-- 5-3388 ASSEMBLY, 42” Dozer Blade (Includes indented items below)
4 4-1616 WELDMENT, 42” Blade
5 3-8145 SCRAPER
6 4-0445 WELDMENT, Slide (2)
7 9-0546 NUT, 3/8-15 Hex Center Lock, Grade 5 or B (9)
8 9-0747 BOLT, 3/8-16 x 1” Square Neck Carriage, Grade 2 (4)
9 9-0850 BOLT, 3/8-16 x 3/4” Short Neck Carriage, Grade 2 (5)
-- 6-1354 BOX, Accessory (Includes indented items below)
10 2-1153 PIN, Holding
11 3-2725 BRACKET, Mount (2)
12 3-4105 DETENT, High Lockout
13 4-1640 WELDMENT, Frame Reinforcement
14 3-4839 BRACE, Latch (Snow)
15 9-1255 U-BOLT, 5/16-18
-- 6-1356 BAG, Hardware (Includes items 16 thru 33)
16 3-1002 PIN
17 1-1714 HAIR PIN, 3/32 x 1-1/8” (4)
18 3-2763 TAB, Lift Lever (2)
19 9-0005 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (2)
20 9-0017 SCREW, 1/2-20 x 2-3/4” Hex Head Cap, Grade 5
21 9-0053 WASHER, 1/4” Internal Tooth Lock (2)
22 9-0063 NUT, 1/4-20 Hex (2)
23 1-1768 PIN, 1/2” x 2” Clevis (3)
24 9-0130 NUT, 3/8-16 Hex (8)
25 9-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (8)
26 9-0250 WASHER, 1/2” SAE Flat (3)
27 9-0390 WASHER, 3/8” Internal Tooth Lock (6)
28 2-3682 REFLECTOR, Red (2) (not shown)
29 9-0803 BOLT, 1/4-20 x 5/8” (2)
30 9-0583 NUT, 1/4-20 Hex Flange Lock (2)
31 1-1773 HAIR PIN, 3/32” (3)
32 9-0266 NUT, 1/2-20 Hex Center Lock
33 9-1067 NUT, 5/16-18 Hex Center Lock, Grade B (2)
LT (Small Frame) ACCESSORIES MANUAL No. 06613