Handles & Controls (Swivel Wheel Model)
Footnotes:
TP 400-5160-7-WB-N
Manual No. 700606421" STEEL DECK
"MR" SERIES 14 & 15
9
Part No Descri
tionItem Qt
Note
1 7074384 HANDLE, Upper Was 41933, Used on Swivel
2 7046737 HANDLE, Middle Used on Swivel
3 7033985 HANDLE, Lower Left Hand Used on Swivel
4 7033986 HANDLE, Lower Right Hand Used on Swivel
5 7047011 CONTROL, Blade Used on Swivel
6 7034872 CLIP, Blade Control Used on Swivel
7 7073444 CABLE, Blade Control (52-13/16") Was 46702, Used on Swivel
8 7090595 BOLT, 5/16-18 x 3/4" Flange Lock, Grade 5 Used on Swivel
9 7090799 2 BOLT, 5/16-18 x 5/8" Carriage, Grade 5 Was 91026 (Used on Swivel)
10 7091601 3 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 91070 (Used on Swivel)
11 7024641 TIE, Wire Used on Swivel
12 7091740 4 SCREW, 5/16-18 x 1-7/8 Curved Head, Grade 2 Was 91189 (Used on Swivel)
13 7035744 4 T-KNOB, 5/16-18 Used on Swivel
14 7090391 4 WASHER, 5/16 Internal Tooth Lock Used on Swivel
15 7076978 3 NUT, 1/4-20 Hex, Grade 5 or B Used on Swivel
16 7090505 SCREW, 1/4-20 x 2" Hex Cap, Grade 5 Used on Swivel
17 7024211 DECAL, Blade Control (R.H. Side) Used on Swivel
18 7046465 GUIDE, Rope Used on Swivel
19 7079577 SCREW, 1/4-20 x 1-1/2" Hex Cap, Grade 5 Used on Swivel
20 7046669 CABLE, Swivel Lock Used on Swivel
21 7046707 2 BRACES, Handle Used on Swivel
To Next Page
Loading...
Need help?
General
