Snapper MRP216015B User Manual

Safety Instructions & Operator's Manual for
21" STEEL DECK
WALK MOWERS
"M" MODEL
SERIES 15
MODELS
PUSH PROPELLED
MODEL MODEL
MR216015T MRP216015B
MR216015B MRP216015BV
MR216015BV
MODEL NUMBER EXPLANATION
MODEL DESIGNATION
SELF-PROPELLED
CUTTING WIDTH
IMI
1
RIP
1
I
ENGINE TYPE
SERIES DESIGNATION
ENGINE HORSE POWER
M - Middle Market P - Self Propelled Model
R- Recyclin_l Model
21 - 21" Cuttin_l Width
60 - 6.0 HP (Engine Horse Power)
15 - Series Desi_lnation
B - BridalS Engine
T - Tecumseh En_line
V - Overhead Valve Engine
Thank you for buying a SNAPPER Product! Before operating your Walk Behind. read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 & 3. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
COPYRIGHT © 2000
SNAPPERINC.
ALL RIGHTS RESERVED
Ih,GA:, 30253 U.S.A.
MANUAL No. 7-4115 (I.R. 10/11/00)

Snapper MRP216015B Specifications

General

Engine Type	Briggs & Stratton
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Cutting Width	21 inches
Cutting Height	1.25-3.75 in
Drive Type	Rear Wheel Drive
Start Type	Pull Start
Wheel Size	8 in (front) / 11 in (rear)

Summary

Important Safety Instructions

Protection for Children

Ensures child safety by mandating supervision and restricting access during mower operation.

Slope Operation Safety

Provides guidelines for safe mowing on inclines, emphasizing caution and proper technique.

Preparation for Mowing Safety

Details essential pre-operation steps like reading the manual and checking safety devices.

General Operation and Maintenance Safety

Safe Operation Practices

Covers safe mower operation, including controls, hazards, and stopping procedures.

Safe Maintenance and Storage Practices

Operating Instructions

Pre-Start Checklist and Procedures

Lists required checks and services before starting the mower for safe operation.

Starting and Operating Engine and Blade

Details the procedure for starting the engine and engaging the blade for mowing.

Propelling the Mower (Self-Propelled Models)

Instructions for engaging the drive system to move the self-propelled mower.

Stopping the Mower Safely

Maintenance Procedures

Initial Service After 5 Hours

Engine Drive Belt and Poly-V Belt Checks

Adjustments and Repairs

Mower Blade Replacement and Sharpening

Wheel Drive Control Adjustment

Driven Disc Service and Adjustment

Replacing Rubber Driven Disc Ring and Bearing

Engine Drive Belt and Poly-V Belt Replacement

Troubleshooting Common Issues

Engine Starting and Performance Problems

Diagnosing and correcting engine starting, stalling, and power loss issues.

Mower Movement and Grass Cutting Issues

Resolving traction loss, poor movement, and grass discharge or cutting problems.

Vibration and Oil Leaking

Primary Maintenance and Engine Care

Lubrication, Fueling, and Starting Checks