EasyManua.ls Logo

Snapper MR216015T User Manual

Snapper MR216015T
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Safety Instructions & Operator's Manual for
21" STEEL DECK
WALK MOWERS
"M" MODEL
SERIES 15
MODELS
PUSH PROPELLED
MODEL MODEL
MR216015T MRP216015B
MR216015B MRP216015BV
MR216015BV
MODEL NUMBER EXPLANATION
MODEL DESIGNATION
SELF-PROPELLED
CUTTING WIDTH
IMI
1
RIP
1
I
ENGINE TYPE
SERIES DESIGNATION
ENGINE HORSE POWER
M - Middle Market P - Self Propelled Model
R- Recyclin_l Model
21 - 21" Cuttin_l Width
60 - 6.0 HP (Engine Horse Power)
15 - Series Desi_lnation
B - BridalS Engine
T - Tecumseh En_line
V - Overhead Valve Engine
Thank you for buying a SNAPPER Product! Before operating your Walk Behind. read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 & 3. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
COPYRIGHT © 2000
SNAPPERINC.
ALL RIGHTS RESERVED
Ih,GA:, 30253 U.S.A.
MANUAL No. 7-4115 (I.R. 10/11/00)
Question and Answer IconNeed help?

Do you have a question about the Snapper MR216015T and is the answer not in the manual?

Snapper MR216015T Specifications

General IconGeneral
BrandSnapper
ModelMR216015T
CategoryLawn Mower
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

Protection for Children

Guidelines to prevent accidents involving children during mower operation.

Slope Operation

Precautions for safe mowing on inclines and slopes.

Preparation

Steps to take before operating the mower for safety.

Operation

Maintenance and Storage

Operating Instructions

Pre-Start Check List

Essential checks and services required before each mower start-up.

Starting and Operation

Procedures for starting the engine and blade, and basic operation.

Propelling Mower

Instructions for operating the self-propelled feature of the mower.

Stopping

Procedures for safely stopping the engine and mower blade.

Maintenance

Change Engine Oil

Procedure for changing the engine oil to ensure proper lubrication.

Check Transmission Grease

Procedure for checking and adding grease to the transmission.

Troubleshooting

Limited Warranty

Related product manuals