Snapper NZM19480KWV - Page 51

SEAT ASSEMBLY (SERIES 0)
Footnotes:
TP 400-5017-4-NZ-N
Manual No. 7006930MID MOUNT Z-RIDER
NZM SERIES 0 & 1
51
Part No Descri
p
tionItem Qt
y
Note
-- 7074771 1 SEAT ASSY (Milsco p/n S673074AB; order parts from 414-410-
3942)
(Incl. angle brackets, seat pan,
cushions, flip-up armrests,
adjusters w/lock & seat switch)
1 7074218 2 SPRING, Compression- Seat Support
2 7074328 2 COVER, Seat Support Spring
3 7090122 2 WASHER, 3/8” Flat
4 7091299 6 NUT, 3/8-16 Nyloc
5 7074674 1 SEAT PAN
6 7074673 1 CROSSMEMBER, Seat
7 7074675 1 PIVOT BRACKET, Seat Hinge
8 7015761 2 SHOULDER BOLT, 5/16-18
9 7090951 2 NUT, 5/16-18 Large Flange Hex Center Lock
10 7091640 6 BOLT, 3/8-16 x 1” Square Neck Carriage GR5
11 7074740 1 GUARD, Fan
12 7023341 2 KNOB, 1/4-20 x 3/4” Thread
13 7091909 2 WELL-NUT, 1/4-20 x 53/64”
14 7090361 6 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
15 7035638 1 CLIP, Open J 3/8 Cushioned
16 7075304 1 LATCH, Seat
17 7090188 4 WASHER, 5/16” Flat
18 7091298 5 NUT, 5/16-18 Hex Nyloc
19 7026292 1 SPRING, Extension
20 7091541 1 SCREW, 5/16-18 x 3/4” Hex Washer self-Tap
21 7028620 1 SPACER, .340 I.D.x .63 O.D. x .310 Thick
22 7091530 1 BOLT, 1/4-20 x 3/4” Short Neck Carriage, GR5
23 7012485 1 RETAINER, 1/4” Bolt
24 7091584 1 NUT, 1/4-20 Hex Flange Lock