Snapper S150XK0H2348 - Page 7

PART NO. DESCRIPTIONREF NO. QTY.
Rear Bumper & ROPS Group
Footnotes
1 5100267 2 SCREW, 1/2-13 X 1.00, SHCS
2 5025396 6 NUT, 1/2-13 HEX NYLOCK FLANGE
3 5400844D 1 PLATE, SEAT BELT ANCHOR - LH - RED (TWO USED ON MODELS WITH
SUSPENSION SEAT)
4 5100139 1 SEAT BELT, RETRACTING - ASSM (MODELS WITHOUT SUSPENSION SEAT)
5 5100190 1 ROPS COMPLETE IN BOX, SNAPPER PRO 48/52
6 5025158 4 WASHER, 1/2 SAE
7 5025155 6 WASHER, 5/16 SAE
8 5025011X6 6 BOLT, 5/16-18 X 3/4 GD5
9 5025392 6 NUT, 5/16-18 HEX NYLOCK FLANGE
10 5403116D 1 PLATE, HEAT SHIELD - RED
11 5025017X10 4 BOLT, 1/2-13 X 1-1/4 GD5
12 5402793D 1 PLATE, CARB. SHIELD - RED
13 5402934D 1 WELD, PLATE, BUMPER - RED
14 - 1 * ROLL BAR POST, RH (SV)
15 - 1 * ROLL BAR POST, LH (SV)
16 - 1 * ROLL BAR TOP LOOP (SV)
17 5100383 2 RUBBER BUMPER (SV)
18 - 2 * BOLT (SV)
19 - 2 * NUT (SV)
20 5100079 2 PIN, HITCH, BLACK W/ PLASTIC LANYARD (SV)
21 5025018X10 2 BOLT, 1/2-20 X 1-1/4" GD8 YZ
22 5025098 2 NUT, 1/2-20 HEX NYLON LOCK
23 5400847D 1 MOUNT, SEAT BELT - RH - RED (MODELS WITHOUT SUSPENSION SEAT)
24 5100377 1 ROLL BAR HARDWARE BAG (SV) (INCLUDES HITCH PIN)
25 5100545 2 RUBBER WASHER (SV)
26 5025440 2 WASHER, 1/2", GD9, YZ
27 5101223 1 SEAT BELT, SUPER SLEEVE (MODELS WITH SUSPENSION SEAT)
28 5101226 1 SEAT BELT, RETRACTING (MODELS WITH SUSPENSION SEAT)
NOTE: * Contact Yard Power Products Group Service Department at 1-800-933-8175 ext.709 for ROPS replacement parts.
You must provide the Custom Products serial number for the ROPS system.
The above parts group applies to the following Mfg. Nos.:
2007
7
© Copyright Briggs and Stratton. All Rights Reserved.
5900665
5900686
5900696
5900697
TP 400-7331-F-M1-SP