Snapper SERIES 19 - Page 19

DRIVE SYSTEM SELF-PROPELLED
Footnotes:
TP 400-5187-B-WB-N
Manual No. 700614921" STEEL DECK WALK BEHIND MOWERS
SERIES 19
19
Part No Descri
p
tionItem Qt
y
Note
37 7090555 1 COTTER PIN, 3/32 x 1/2” or 7091597
38 7017696 1 BUSHING, Powdered Metal
39 7041855 1 DISC, Driven (Cantilever)
40 7011724 1 WASHER, 44 x .78 x .025 Curved
41 7013847 1 RETAINER, 3/8” Bolt
42 7029025 1 SPRING, Wheel Drive
43 7091026 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR 5 or 7090799
-- 7059462 1 ASSEMBLY, Deck Bracket (Incl. items 7 & 44A) Used on RP2167519B,
RP2167519BDVFC,
RP217019BV, RP2187519BV,
RP216019KWV &
RP2167519BDV
-- 7052987 1 ASSEMBLY, Deck Bracket (Incl. items 44B, 45 & 46) Used on RP217019BVE,
P2167519B, P2167519BFC,
P2187519BV, P2187519BVE,
P2187519BVFC &
RP2187519BVE
44A -- 1 BRACKET, Deck, (Use 7033774 & 7017696) used on early models
44B 7033774 1 BRACKET, Deck
45 7012306 2 BUSHING, Flange, .381 x .625 x .62
46 7021758 1 SPACER, .500 x .65 x 1.75
47 7100447 1 SPACER, Idler Arm
48 7061275 * KIT, Drive Disc Assembly
49 7501000 ASSEMBLY, Driven Disc (replaces items 21-24, 30-32, & 39) was 7073390 or 7053225
NOTE: * Includes Steel Drive Disc Assy (7073528), Bushing (7013893), 3/8-16 Hex Nut (7091302) & item 38.